2. Loosen the rocker shaft bolts in 2-3 stages, from the end to the middle. Keep in mind that some valves are open and the rocker arms are under spring pressure. Therefore, loosen the bolts gradually, otherwise the shaft will be deformed (photo).
5.2 Rocker shaft bolts
3. Remove the bolts and store them in the order they were installed (photo).
5.3 Place the roller bolts in the cash register in the order in which they are installed
4. Remove the shaft with rocker arms (photo).
5.4 Removing the shaft with rocker arms. The procedure for checking the parts is described below.
5. Installation is performed in reverse order. Tighten the bolts evenly to the specified torque, in order from the periphery to the middle.