2. Drain the oil from the gearbox.
3. Disconnect the front propeller shaft from the gearbox.
4. Loosen the bolts securing the axle shafts to the gearbox, move the axle shafts and secure them with wire, preventing sagging on the CV joints.
5. Support the gearbox with a stand.
6. Unscrew the gearbox mounting bolts (photo).
9.6 Front gearbox mounting bolts
7. Loosen the engine mount bolts and lift the engine.
8. Unscrew the bolts securing the gearbox to the frame (photo).
9.8 Bolts for fastening the gearbox to the frame.
9. Carefully lower the stand and remove the gearbox.
10. Installation is carried out in reverse order.