Disc brakes
| Disc runout | no more than 0.07 mm |
| Uneven thickness of the disc | no more than 0.02 mm |
| Maximum disc thickness | |
| CL25VA (rear-wheel drive vehicles with 4-cylinder engines) | 20.0 mm |
| CL25VD (all four-wheel drive vehicles and all vehicles with V6 engines) | 24.0 mm |
| AD14VB (rear brake disc) | 16.0 mm |
Drum brakes
| Inner diameter of the drum | |
| LT26B (rear wheel drive cars) | 261.5 mm |
| DS25B, DS25C, DS25D (all-wheel drive vehicles) | 255.5 mm |
| LT30A (since 1991) | 296.5 mm |
| Radial runout | no more than 0.05 mm |
| Ovality | no more than 0.03 mm |
| Taper | no more than 0.04 mm |
Vacuum booster
| Pushrod protrusion from the master cylinder side | 10.275-10.525 mm |
| Adjusting the push rod from the pedal side | not provided |
Tightening torques (Nm)
| Front Disc Brake Caliper Pins | 20-27 |
| Bolts for mounting the caliper to the steering knuckle | 64-86 |
| Rear Disc Brake Caliper Pins (1988) | 20-27 |
| Bolts for mounting the caliper to the rear axle beam (1988) | 48-58 |
| Bolts for fastening the hub to the disk | 43-63 |
| Bolt for fastening the hose fitting to the caliper | 15-17 |
| Pedal axle nut | |
| Before 1990. | 7,2-9,7 |
| Since 1991. | 15-20 |
| Brake booster mounting bolts to engine compartment bulkhead | |
| Before 1990. | 7,2-9,7 |
| Since 1991. | 12-15 |
| Master cylinder mounting nuts | 7,2-9,7 |
| Bolts securing the brake shield to the rear axle beam | 47-56 |
| Wheel cylinder fastening nuts | |
| Before 1990. | 4,7-6,7 |
| Since 1991. | 5,9-9,7 |
| Rear brake pressure regulator mounting bolts | |
| Before 1990. | 7,2-9,7 |
| Since 1991. | 15-18 |