Terrano 1 (1986-1995, petrol)

Replacing the filter of the ejector valve of the exhaust gas oxidation system (Nissan Terrano 1)

0

1. Unscrew the bolts and nuts of the filter cover and remove the filter (photo).

2. Replace the filter and install the cover.

31.6a Access to the air valve filter is provided after removing the cover

31.6a Access to the air valve filter is provided after removing the cover
1. Filter

31.6b V6 Engine Air Valve Filter Parts

31.6b V6 Engine Air Valve Filter Parts
1. Lid; 2. Limiter; 3. Reed valve body; 4. Filter element

[The original is posted on the portal nissanbook]

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article has been reviewed: Andrey Lazarev

Send this information to your friends:

◀ Previous

Terrano 1: Maintenance

Next ▶

Replacing the fuel filter
Replacing the air filter and crankcase ventilation filter
Checking seat belts
Drive belts — checking and adjustment
Checking the air filter thermostat

Replacing the filter of the tank with the absorber
Checking the throttle body mount
Checking and adjusting idle speed (fuel injection engines)
Changing the oil in the transfer case
Changing oil in manual transmission

Similar information for other Nissan models

➜ Replacing the exhaust system Nissan Murano 1 (2002-2007, petrol)
➜ Replacing the air filter of the intake system (petrol… Nissan Qashqai 1 (2006-2013)
➜ Exhaust gas oxidation system (1.4 and 1.6 l engines) Nissan Sunny 7 (1990-1998)
➜ Replacing the cabin filter (ventilation system) Nissan Micra 3 (2002-2010, petrol)
➜ Replacing the Positive Crankcase Ventilation (PCV) Filter Nissan Almera 1 (1995-2000)
➜ Checking the condition and replacing components of the idle… Nissan Maxima 4 (1994-1999)

Link in different formats to this article

TEXTHTMLBB Code

Comments and feedback from visitors

No comments yet

Cookies are used to improve the site's performance. 💻 Continue by agreeing to the terms.