2. On vehicles with manual transmission, remove the clutch mechanism (Chapter 8).
3. Apply flywheel orientation marks on the crankshaft (photo).
19.3 Marking of the starting point of the flywheel (necessary in order not to disturb the balance
4. Loosen the flywheel mounting bolts (torque converter drive disk) to the crankshaft (photo).
19.4 Flywheel bolts
5. Remove the flywheel (torque converter drive disk)
6. Check the condition of the flywheel friction surface. Grind off minor defects. Check the deviation from the plane with a gauge and feeler gauges.
[Data posted on the website nissanbook.ru]
7. Align the marks made during disassembly and install the flywheel.
8. Further operations are performed in reverse order.