Table of contents: Removal ↓ Installation ↓
Removal
1. Disconnect the negative cable from the battery.
2. Remove the switches located on the trim panel.
3. Loosen the mounting screws and remove the trim from the instrument cluster.
4. Disconnect the electrical connectors on the rear of the instrument cluster.
5. Remove the mounting screws (are shown by arrows in the accompanying illustration) and remove the instrument cluster from the vehicle.
Installation
Installation is carried out in reverse order.
Check the quality of the contacts and the reliability of the fastening of the electrical connectors of the instrument cluster (the rear view of the instrument cluster board is shown in the accompanying illustration).