Table of contents: Move forward and backward ↓ Adjusting the seat backrest tilt ↓ Embarkation and disembarkation of…↓ Transformation of seats into a table ↓ Lowering the seat back ↓ Returning the backrest to its…↓ Headrest height adjustment ↓ Folding the seats ↓ Removal and installation seats ↓
Move forward and backward
Separate type seats
The left and right seats are adjusted independently.
Pull the lever located under the seat and move the seat forward or backward.
To lock, release the lever and slide the seat until it clicks into place.
Attention:
Do not move the seat all the way forward, as the seat will not lock in place in this position.
If a passenger sits between the left and right seats, align the seats to ensure safety.
Solid type seats
Pull the lever up and move the seat forward or backward.
To lock, release the lever and move the seat until it locks into place.
Caution: Do not move the seat all the way forward, as the seat will not lock in place in this position.
Adjusting the seat backrest tilt
Separate type seats
The backrest angle of the left and right seats can be adjusted independently.
Pull the lever up and select the desired seat back angle.
When the lever is released, the backrest is locked.
Solid type seats
Pull the loop and select the desired seat back tilt.
Embarkation and disembarkation of rear passengers
The following steps will tilt the seatbacks forward, move the seats forward, and make it easier for rear passengers to get in and out.
Separate type seats
To board passengers, pull lever 1.
To disembark passengers, pull lever 2.
To return to the original position, move the seat back, then lift the backrest and slide the seat until it locks into place.
Solid type seats
To board passengers, pull loop 1.
To disembark passengers, pull loop 2.
To return to the original position, move the seat back, then lift the backrest and slide the seat until it locks into place.
Transformation of seats into a table
Separate type seats
The backrests of the second row seats can be folded down to serve as a table. The left and right seats can be controlled separately.
Lowering the seat back
1. Pull the lever and lower the seatback forward.
2. Raise the seat back until it clicks into place.
3. Pull the lever located on the side of the backrest and set the backrest to a horizontal position.
Returning the backrest to its original position
1. Raise the backrest to the stop.
2. Pull the lever and raise the backrest further.
Headrest height adjustment
The head restraint height adjustment is the same as on the front seats (see above).
Folding the seats
By folding the seats, the luggage compartment can be increased in size.
Solid type seats
Pull up the lever located on the left side of the seat and lift the seat cushion.
Lift the pillow until it clicks into place.
To restore the seat, pull the lever up and lower the cushion.
Note: If you slightly shake the cushion, it will be easier to pull the lever.
Removal and installation seats
Separate type seats
You can remove and install both the left and right seats.
Removal
1. Transform the seats into a table (see above).
2. Unlock the seat by simultaneously pulling the left and right handles located on the lower rear side of the seat.
3. Pull the seat forward and up and remove it.
Note:
The seat runners can be moved.
To do this, press the button and move the runners forward or backward.
Attention:
Before performing the seat removal procedure, make sure that the seat is locked in place.
Do not remove the seat while driving.
Remove the seat with two or more people.
Do not transport the removed seat in the vehicle.
Installation
Installation is performed in the reverse order of removal.