Removing
1. Disconnect the battery from the ground.
2. Unscrew from coil (located on the left side of the cylinder head) high voltage wire.
3. Disconnect the connector.
4. Loosen the nuts and bolts and remove the coil (indicated by arrows).
Examination
1. Check the resistance between the + and - terminals, between the + terminal and the high-voltage wire, compare with the standard (resistances are given for 20°С).
2. Check the circuit between the high voltage wire and the case.
3. Replace coil if found to be faulty.
Installation
Installation is carried out in the reverse order.