Table of contents: Checking the amplifier ↓ Installing and adjusting the cleaner ↓ Adjusting the washer nozzle ↓ Check valve for washer ↓
Checking the amplifier
Make connections as shown in the picture. If the test lamp lights up when connecting contacts 1 or 6 to the negative of the battery, the amplifier is working properly.
Installing and adjusting the cleaner
The adjustment sequence is the same as for the windshield wiper. Tightening torque of the lever mounting nut: 13-18 Nm. Before installing the lever, clean its axle.
Adjusting the washer nozzle
The adjustment is carried out in accordance with the drawings. The nozzle can be rotated by ±10° in any direction.
Check valve for washer
The valve is installed in the slit of the rear window washer hose in the area of the right rear roof pillar. The correct orientation of the valve is shown in the figure.
