Table of contents: Folding (for hatchback models) ↓ Access to the trunk from inside the…↓
Folding (for hatchback models)
1. Before folding the seat, the tongue and buckle of the belt must be secured.
2. Fasten the seat belt to the hook.
3. Remove the headrests.
4. Pull the straps to remove the seat.
5. Pull the straps to fold the seat back.
[The full article is available on the resource www.NISSANBOOK.ru]
6. Before returning the seat to the upright position, the seat belt should be secured to the hook.
7. Before returning the seat back to its original position, make sure that the tongue and buckle of the belt are secured.
CAUTION! To avoid injury in the event of sudden braking or an accident, do not sit in the luggage compartment or on a folded seat while the vehicle is moving.
Access to the trunk from inside the car (for sedan type models)
The trunk is designed for loading and unloading from the rear seat of the car as shown in the figure.
1. Fasten the seat belt to the hook.
2. Pull the straps to fold the seat back.
3. Before setting the seat back to the straight position, the seat belt should be secured to the hook.
- After setting the seat back to the vertical position, check that it is pushed all the way in and securely locked.
- To avoid injury in the event of sudden braking or an accident, do not sit in the luggage compartment or on a folded seat while driving. These areas are not equipped with safety features and are not intended for passengers.