- The device is designed to minimize the number of maintenance operations, and the only parts subject to wear are the brushes and bearings.
- The brushes should be checked after a mileage of approximately 120 thousand km and replaced if necessary. The bearings are filled at the factory with grease designed for their lifetime and do not require maintenance.
- Check the drive belt every 10,000 km for correct tension, which should be no more than 10 mm at the center of the longest section between the pulleys (on a new belt 6 mm). To tension the belt, turn the alternator and air conditioning compressor belt tensioner screw.
See the source on the portal: nissanbook.ru