2. Disconnect the headlight electrical connector.
3. Remove the rubber protective cover from the back of the headlight, press the bulb holder and turn it counterclockwise. Remove the bulb from the headlight (the components of the headlamp assembly are shown in the accompanying illustration).
1 - protective cover; 2 - holder; 3 - lamp; 4 - headlight; 5 - ring; 6 - screws
Note: Avoid touching the glass bulb with bare fingers. Grease deposits will shorten the life of the bulb. Accidental stains can be removed with methyl alcohol, after which the bulb should be dried by wiping it with a clean napkin or piece of cotton cloth.
4. Install a new lamp into the socket. Check that it is installed correctly. Also check that the holder and protective cover are installed correctly.
Data taken from this portal [NissanBook.ru]