Table of contents: Removal ↓ Installation ↓
Removal
1. Jack up the car and place it on supports.
2. Mark the position of the front and rear propeller shaft flanges relative to the flanges of the final drive pinions, the front drive flange of the transfer case and the parking brake drum.
3. Loosen the bolts and nuts securing the cardan shaft flanges to the main transmission and transfer case flanges. Remove the shafts from the vehicle.
Installation
Installation is carried out in reverse order.
1. Ensure that all the landing marks applied during dismantling are correctly aligned.
See the original on the resource: NISSANBOOK
2. Tighten all fasteners to the required torque.