Table of contents: Removal ↓ Installation ↓
Removal
1. Drain the coolant from the radiator.
Attention.
- This step is performed on a cold engine.
- Do not allow coolant to come into contact with the accessory drive belt.
2. Disconnect the upper radiator hose.
3. Disconnect the wire connector from the coolant temperature sensor.
[The original can be read on the website: NissanBook]
4. Remove the water hoses (models for Northern Europe).
5. Remove the heater hoses.
6. Remove the cooling system outlet.
7. If necessary, remove the coolant temperature sensor from the cooling system outlet.
Installation
Installation is carried out in the reverse order of removal.