Removing
1. Remove the engine cover.
2. Remove the air filter housing and intake duct.
3. Remove the engine's rear lifting eye.
4. Remove the vacuum hose.
5. Remove the vacuum pump.
6. Drain engine coolant.
Attention. Drain the coolant on a cold engine.
7. Remove the upper radiator hose.
8. Remove the heater hose.
9. Disconnect the expansion tank hose.
10. Remove the output of the cooling system.
11. If necessary, remove the coolant temperature sensor from the outlet pipe with thermostat assembly.
Attention. Handle the coolant temperature sensor carefully, do not hit it.
Installation
Installation is made in an order, the return to removal.