Table of contents: Panel B ↓ Panel A ↓ Steering column covers ↓ Lower section on the driver's side ↓ Overlay C ↓ Front passenger airbag module ↓ Dashboard ↓
Panel B
1. Unscrew 4 screws.
2. Pull the panel towards the rear of the vehicle, release the clips and remove the panel.
Panel A
Wrap a screwdriver in electrical tape, insert it into the gap at the top of the panel, release the latches and remove the panel.
Steering column covers
Separate the upper and lower steering column covers. Remove the shift lock release button trim, press the latches and remove the button from the cover.
Lower section on the driver's side
1. Loosen the 6 steering column cover screws, remove the covers, then loosen the 2 screws.
Caution: Before removing, wrap the selector lever with a cloth to prevent damage.
2. Pull the section forward, release the metal clip and remove it.
Overlay C
1. Press the top of the pad with your hand, release the 2 side lower latches.
2. Pull the trim towards the rear of the car, release the 6 metal clips at the top. Remove the trim.
Front passenger airbag module
Unscrew 4 special bolts, unscrew 3 nuts and remove the airbag module, see the chapter Supplemental passive restraint system (SRS).
Dashboard
Remove the 2 nuts, lower the steering column, then remove the instrument panel.
Caution: Be careful not to stretch or damage the wiring when lowering the steering column.