Adjusting the position of the windshield wiper lever autostop
Attention:
When adjusting the windshield wiper arm, operate the windshield wiper motor once and stop it in the auto-stop position.
When installing the wiper arm, place the wiper blade in the position corresponding to the auto-stop position of the wiper arm and tighten it so that the wiper arm does not move.
Front windshield wipers
Adjust the position of the windshield wiper arm auto stop according to the following dimensions.
- Size A: 39.0±7.5 mm
- Size B: 47.0±7.5 mm
Front wiper arm retaining nut:
: 20.6-26.5 Nm (2.1 -2.7 kg·m)
Rear wiper
Adjust the position of the windshield wiper arm autostop (the brush should touch the bottom edge of the heating element).
Rear wiper arm mounting nut:
: 12.7-17.6 Nm (1.3-1.7 kg·m)