1. Speedometer
Displays the current speed of movement.
2. Odometer switch button
If you briefly press this button several times in a row when the ignition key is in the ON position, the total and current mileage readings will switch in the following sequence: A→B→A.
3. Total mileage indicator (odometer)
Displays the total mileage of the vehicle (in km).
4. Current mileage indicator
When the ignition key is in the ON position, the current vehicle mileage is displayed in km. The unit of measurement of the rightmost digit is 100 m
The article was copied from here NissanBook.ru
It is possible to display two values of the current mileage (A) and (B).
To reset the reading to "0", press and hold the odometer switch button for more than 1 second.
If you press the odometer switch button briefly, it will switch sequentially from (A) to (B) and vice versa.
Note:
You can reset readings (A) and (B) independently.
You can count the distance traveled from the moment you started moving at (A), and the distance traveled, for example, after refueling at (B).
5. Tachometer (engine speed meter)
The tachometer displays the engine speed per minute.
(The scale may differ on different models).
Attention: Make sure that the arrow does not enter the critical speed zone.
6. Fuel level indicator
When the ignition key is in the ON position, the fuel level is displayed.
Fuel tank capacity: approx. 60 liters.
On sloped roads, the fuel in the tank moves, so the needle may fluctuate slightly.
If the ignition key is in the ON position, the movement of the arrow during refueling will slow down, which is not a malfunction.
7. Coolant temperature gauge
Displays engine coolant temperature (ignition key in the ON position).