Table of contents: Removal ↓ Installation ↓
Removal
1. Release the latches and remove the filter cover together with the seal.
2. Remove the filter element.

3. Loosen the bolt next to the battery.

4. Loosen the bolt on the engine compartment mudguard.

5. Disconnect the hoses.

6. Remove the air duct from the mounting holes.

7. Loosen the clamp.

8. Disconnect the crankcase ventilation hose.

9. Loosen the bolt.

10. Loosen the clamp.

11. Remove the filter from the throttle body neck.

12. Disconnect the small diameter vacuum hose.
Installation
Installation is carried out in reverse order.