Electromagnetic valve for increasing the engine speed in idle mode
Solenoid valve - indicated by an arrow.
The quick idle solenoid valve is mounted on the front side of the throttle body.
Disconnect the negative battery cable before removing it.
If necessary, remove the air filter following the instructions in subsection 6.3.2.2, to improve access to the valve.
Removing
1. Disconnect the connector from the solenoid valve.
2. Unscrew the solenoid valve from the throttle body, remove the plunger, spring and sealing washer.
Installation
3. Installation is carried out in the reverse order of removal. When installing, use a new sealing washer. Check that the plunger and spring are correctly installed.