Table of contents: Removal ↓ Installation ↓
The engine quick warm-up temperature valve is installed on the left side of the throttle body.
Before removing it, disconnect the negative battery cable.
Removal
1. Remove the air filter following the instructions provided subsection 6.3.2.2.
2. Loosen and remove the nut and washer, then remove the fast idle cam mounting plate, spring, washer and lever, making a note of how they were installed.
3. Loosen the mounting screw and remove the valve mounting plate. Remove the valve and remove its sealing ring.
Installation
4. Installation is carried out in the reverse order of removal. When installing, use a new sealing ring and check that all elements of the connecting mechanism are correctly installed.