Table of contents: Removal ↓ Installation ↓
The switch is installed in the high pressure line of the power steering system in the right rear corner of the engine compartment.
Before removing the switch, position the front wheels straight and disconnect the negative battery cable.
Removal
1. The switch is mounted in the power steering high pressure line in the right rear corner of the engine compartment. Before removing the switch, set the front wheels straight and disconnect the negative battery cable.
2. Find the switch and disconnect the connection connector.
3. Unscrew the switch, remove the switch O-ring and quickly plug the hole in the tube to prevent hydraulic fluid leakage and dirt from entering the hydraulic system.
Installation
4. Installation is carried out in the reverse order of removal, using a new sealing ring.
[Data posted on the website: NissanBook.ru]