Table of contents: Removal ↓ Installation ↓
Attention! See safety precautions in subsection 6.3.2 before starting work.
Removal
1. Disconnect the negative battery cable.
2. Disconnect the vacuum hose from the fuel pressure regulator (indicated by the arrow), which is installed on the left side of the fuel manifold.
3. Release the pressure from the fuel system following the instructions in subsection 6.3.2.6. Loosen the clamp and disconnect the fuel hose from the bottom of the fuel pressure regulator.
4. Remove the two mounting bolts and remove the regulator from the fuel manifold. Remove the sealing ring installed on the regulator and discard it - a new one must be used during installation.
Installation
5. Installation is carried out in the reverse order of removal. When installing, use a new sealing ring. After installation, start the engine and check for fuel leaks.
(Original publication on the portal: www.NISSANBOOK.ru)