Attention! See the warnings at the beginning of the Section Depressurizing the supply system.
1. Relieve the pressure in the supply system (see Section Depressurizing the supply system). Disconnect the negative cable from the battery.
Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to put the equipment into operation!
2. Disconnect the intake duct assembly with the resonator from the throttle body and air cleaner.
3. Thoroughly wipe the fuel pressure regulator and its surroundings. Disconnect the vacuum hose and fuel return line from the regulator
4. Turn out two fixing screws and remove assembly of a regulator from a fuel highway.
5. Lubricate the new governor O-ring with clean engine oil.
6. Installation is carried out in the reverse order. Track reliability of a tightening of fixture.