Table of contents: Removal ↓ Installation ↓
The fuel pressure regulator is mounted on the right side of the throttle body.
Removal
Attention! See safety precautions in subsection 6.3.1 before starting work.
1. Before removing it, disconnect the negative battery cable.
2. Access to the fuel pressure regulator will be greatly improved if the air filter is removed (see subsection 6.3.1.2).
3. Release the pressure from the fuel system (see Fig. subsection 6.3.1.7).
4. Loosen the clamp and disconnect the fuel hose from the fuel pressure regulator.
5. Disconnect the vacuum hose from the regulator.
(The text is published on the website: www.NISSANBOOK.ru)
6. Loosen and remove the two mounting screws, then remove the regulator from the throttle body and remove both O-rings.
Installation
7. Installation is carried out in the reverse order of removal.
8. Use new O-rings when installing.