Table of contents: Removal ↓ Installation ↓
The air flow sensor is mounted behind the throttle body.
Removal
1. Before removing it, disconnect the negative battery cable.
2. Access to the sensor will be greatly improved if the air filter is removed (see subsection 6.3.1.2).
3. Disconnect the connection connector from the air flow sensor.
4. Remove the three mounting screws, then remove the sensor from the throttle body and remove its O-ring.
Installation
5. Installation is carried out in the reverse order of removal.
6. When installing, use a new O-ring and tighten the mounting screws securely.