Table of contents: Removal ↓ Installation ↓
High-speed engine solenoid valve (idle mode) mounted on the right side of the throttle body.
Removal
1. Before removing it, disconnect the negative battery cable.
2. If necessary, remove the air filter (see subsection 6.3.1.2), to improve access to the valve.
3. Follow the solenoid valve wires to the connector and disconnect it
4. Unscrew the solenoid valve from the throttle body, remove the plunger, spring and sealing washer.
5. If the solenoid valve is to be replaced, its wires must be removed from the connection connector.
6. If you do not want to disassemble the connection connector, the solenoid valve can be removed together with the fuel injector and additional air supply valve.
[The original can be read on the website: www.NissanBook.ru]
Installation
7. Installation is carried out in the reverse order of removal.
8. Check that the plunger and spring are installed correctly.