Connector for additional fuel supply valve
1. Connector for connecting an additional fuel supply valve
2. Fixing screws
An additional air supply valve is located in front of the throttle body.
Disconnect the negative battery cable before removing it.
Removing
1. Disconnect the connector from the solenoid valve.
2. Remove the two mounting screws, then remove the valve from the throttle body and remove the gasket.
3. If necessary, after removing the valve, unscrew the fixing screws and separate the two halves of the valve. Check that the valve plug moves easily and quickly returns to its original position under the influence of the spring. If not, the valve must be replaced.
Installation
4. Installation is carried out in the reverse order of removal. Use a new gasket when installing.