Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system! Jack up the front of the car and place it on jack stands, remove the right front wheel.
2. Remove drive belts (see chapter Settings and ongoing maintenance).
3. Remove the right front wheel arch protection locker.
4. After blocking the crankshaft bolt from turning with a chain or strap wrench, release the central bolt of its fastening.
5. Pry the pulley on both sides with screwdrivers or a large pry bar and carefully remove it from the shaft stud. Use a puller if necessary.
6. Installation is carried out in the reverse order.