8.1 Expansion tank bolts on V6 engines
2. Drain the coolant.
3. Remove fan shroud and attachment belts.
4. On V6 engines: remove the pump pulley and damper pulley from the crankshaft, remove the timing belt covers.
5. Turn away bolts of fastening of the pump (photo).
8.5a Pump mounting bolts on 4-cylinder engines
8.5b Pump mounting bolts on V6 engines
6. Remove the pump, remove the old seal.
7. When assembling, lubricate the gasket with sealant and install on the cylinder block (photo).
8.7 Engine coolant pump parts V6
1. For rear-wheel drive vehicles; 2. Gasket; 3. For all-wheel drive vehicles
8. Tighten the bolts evenly to the specified torque.
9. The remaining operations are performed in the reverse order. Adjust the tension of the belts, drink the fluid, warm up the engine and check for leaks. Add fluid if necessary.