Table of contents: Right engine mounting pad ↓ Left engine mounting pad ↓
Installation is carried out in the reverse order of removal, taking into account the points below.
Attention.
- Do not allow engine oil to come into contact with the engine mounting pads. Be careful not to damage the engine mounting pads.
- Make sure the mounting pads are seated correctly, then tighten the mounting nuts and bolts.
Right engine mounting pad
Install the right engine side mounting pad as follows:
1. Tighten the bolts securing the right mounting pad to the engine.
Note: The arrow in the figure shows the front of the engine.
2. Tighten the mounting bolts in the sequence shown in the figure.
Left engine mounting pad
Install the left engine mounting pad on the transmission side as follows:
Information copied from the website nissanbook
1. Tighten the mounting bolt (A).
Note: The arrow in the figure shows the front of the engine.
2. Tighten the mounting bolt (B) to the specified tightening torque.
3. Tighten the mounting bolt (A) to the specified tightening torque.