Engine assembly (modifications with manual transmission) — installation (Nissan Qashqai J10)

Installation is carried out in the reverse order of removal, taking into account the points below.

Attention.

• Do not allow engine oil to come into contact with the engine mounting pads. Be careful not to damage the engine mounting pads.
• Make sure the mounting pads are seated correctly, then tighten the mounting nuts and bolts.

Right engine mounting pad

1. Tighten bolt "4" shown in the figure.

Note: The arrow in the figure shows the front of the engine.

2. Tighten the bolts to the specified tightening torque in the sequence shown in the figure.