Table of contents: Removal ↓ Installation ↓
Removal
Loosen the screw (1), insert a plastic or wooden spatula (2), release the clamps (3), then release the protrusions.
Note: Insert the spatula in close proximity to the clamp or protrusion. Do not damage adjacent parts.
Installation
Replace the 2 bushings at the bottom (pay attention to the correct installation).
Align the tabs with the bushings and secure them.
Note: First align and secure the protrusion with bushing 1, then with bushing 2. Or align both protrusion-bushing pairs at once.
Caution: Do not attempt to align the tab with sleeve 2 first, then with sleeve 1.