Table of contents: Removal ↓ Installation ↓
Removal
1. Remove the carburetor.
2. Drain some of the coolant.
3. Disconnect all hoses from the manifold, having marked them first.
4. On vehicles with a neutralizer, disconnect the recirculation tube from the manifold.
5. Disconnect the connector from the coolant temperature sensor, remove the ground connection bus.
6. Remove the manifold stand.
7. Make sure all hoses and wires are disconnected.
(The text was borrowed from here: NissanBook.ru)
8. Loosen the bolts and nuts and remove the manifold.
9. Remove the gasket.
Installation
1. Installation is carried out in reverse order.
2. Before assembly, replace the gasket, thoroughly cleaning the separating surfaces.
3. Make sure that the hoses and wires are connected correctly.