Removing
1. Disconnect the battery from the ground and partially drain the coolant.
2. Remove the air filter.
3. Disconnect the throttle cable.
4. Disconnect the carburetor wiring connectors.
5. Disconnect and plug the fuel hose (the arrow indicates the collar).
6. Label all hoses and disconnect them from the carburetor.
7. Remove 4 bolts and remove the carburetor, remove the heat insulator or heater (on vehicles with neutralizer).
8. Plug the hole in the manifold.
Installation
1. Installation is carried out in the reverse order.
2. Before installation, check the cleanliness of the mating surfaces of the manifold and carburetor.
3. Adjust the throttle cable.
4. Add liquid.
5. Check and, if necessary, adjust the idle speed and mixture quality.