Lighting system
When the knob is turned to the position "" side lights, taillights, license plate lighting and instrument lighting are switched on.
When the knob is turned to the position "" The headlights come on and the rest of the lights stay on.
To switch to high beam, move the switch handle away from you. To turn the low beam back on, pull the handle towards you.
Daylight system (installed additionally)
On models equipped with this system, the dipped beam headlamps, position and tail lamps, license plate lamp, and instrument illumination illuminate as soon as the engine is started and the headlight switch is off. It should be remembered that when the headlight switch is off, it is not possible to switch from low beam to high beam.
When the knob is turned to the position "" the low beam is turned off.
Flashing headlights
To briefly turn on the headlights, pull the knob towards you.
Turn signal
Move the knob up or down to turn on the corresponding turn signal. When the turn is completed, the knob will automatically return to its original position.
Lane change warning
To signal a lane change, move the handle up or down until the turn signal flashes.