WARNINGS:
- When disconnecting the throttle cable, note the position of the locknuts.
- When installing the cable, make sure the throttle opens fully when the accelerator pedal is fully depressed, and returns to the idle position when the pedal is released.
- Make sure that the throttle cable is not twisted.
- Adjustment of the throttle cable of an automatic transmission is described in chapter «Automatic transmission».
1. Loosen the locknut Tighten the adjusting nut until the throttle control begins to turn.
2. Loosen the adjusting nut 1.5-2 turns and tighten the locknut.