Removal and installation the fuel pump (Nissan Almera N15)

1. Release the pressure in the fuel system (see chapter "Engine management system").

2. Remove the hatch located under the rear seat.



3. Disconnect the fuel hoses and electrical connectors.

4. Remove six screws.

5. Remove the fuel level sensor, disconnect the fuel hoses and electrical connector.





6. Remove the fuel pump with the housing. To do this, pull up the front part of the pump and move it forward.



7. Remove the fuel pump housing.



8. Installation is carried out in reverse order.

WARNINGS: Observe the specified tightening torques. Install the fuel pump electrical connector to the left of the fuel hose as shown in the illustration.