Table of contents: RS5F30A and RS5F31A ↓ RS5F32A ↓
RS5F30A and RS5F31A
Axial clearance of gears, mm
- 1st gear driven gear - 0.18-0.31
- 2nd gear driven gear - 0.20-0.30
- 3rd gear driven gear - 0.20-0.30
- 4th gear driven gear - 0.20-0.30
- 5th gear pinion - 0.18-0.31
Clearance between synchronizer locking ring and gear ring, mm
- Memorial - 1.0-1.35
- Maximum permissible - 0.7
Reverse gear lock bushings
- Moment of resistance of the clamp (on the gear selector rod), Nm — 4.9-7.0
Front primary shaft bearing retaining rings
- Gap between ring and groove, mm — 0-0.1
5th gear synchronizer hub retaining rings (primary shaft)
- The gap between the ring and the groove is 0-0.1 mm
Secondary shaft half rings
- The gap between the ring and the groove is 0-0.1 mm
Thrust washers for axle gears
- Clearance between axle gear with washer and differential box, mm — 0.1-0.2
Models with GA16DE and CD20 engines
Other models
Preload of secondary shaft and differential bearings
Preload (for reusable bearings), mm
Torque resistance moment (for new bearings), Nm
Secondary shaft bearing adjusting rings
Selecting the secondary shaft bearing adjustment track
Differential bearing adjusting rings
RS5F32A
Axial clearance of gears, mm:
- 1st gear driven gear - 0.18-0.31
- 2nd gear driven gear - 0.20-0.30
- 3rd gear driven gear - 0.20-0.30
- 4th gear driven gear - 0.20-0.30
- 5th gear pinion - 0.18-0.31
Clearance between the synchronizer locking ring and the gear ring, mm:
Synchronizers 1st, 4th and 5th gears
- Nominal
- 1st gear - 0.95-1.45
- 4th gear - 0.90-1.45
- 5th gear - 0.90-1.50
- Maximum permissible - 0.7
2nd and 3rd gear synchronizers
Reverse gear lock bushings
See data for RS5F30A/31A.
Gearbox housing covers
Axial clearance of secondary shaft bearing, mm — 0-0.1
Front primary shaft bearing retaining rings
See data for RS5F30A/31A.
5th gear synchronizer hub retaining rings (primary shaft)
See data for RS5F30A/31A.
Secondary shaft half rings
- The gap between the ring and the groove is 0-0.1 mm
Primary shaft bearing adjusting bushings
- Distance C, mm — 230.15-230.1
Thrust washers for axle gears
See data for RS5F30A/31A (engines GA16DE CD20).
Differential bearings
- Preload (for reusable bearings), mm — 0.25
- Torque resistance moment (for new bearings), Nm - 2.9
Differential bearing adjusting rings
See data for RS5F30A/31A.