2. If only part of the metal tube is damaged, then it can be cut out and replaced with a rubber hose 1 CO mm longer than the part to be removed. Secure both ends of the hose with clamps.
3. If the length of the removed part of the metal tube exceeds 150 mm, then a metal tube with hose sections put on at the ends should be used for connection. The total length of the hoses must not exceed 250 mm.
4. After repair, start the engine and check for leaks.
4.1 Fuel line for fuel injected engines
1. Fuel supply pipe; 2. Return fuel line; 3. Gasoline vapor sampling tube; 4. Control valve; 5. Fuel level sensor; 6. Pump; 7. Gasket; 8. Buck; 9. Tank guard (on all-wheel drive vehicles)