Removing
1. Fully open the hood.
2. Remove the left and right front wiper arms from the vehicle.
3. Remove the left and right identification covers from the vehicle.
4. Remove the left and right windshield washer nozzles:
Pull nozzle (A) up.
Disconnect washer hose.
Attention. Install a cap on the washer nozzle tube to prevent leakage and contamination.
5. Unhook the foam barrier (A) from the front fender (left and right).
6. Remove the hood top cover retaining clips, then pull forward and disconnect the hood top cover from the windshield.
7. Flip the top cover over to access the main windshield washer pipe (A).
8. Unhook and remove the main line of the windshield washer.
Attention. Install caps on the washer nozzle tubes to prevent leakage and contamination.
9. Remove the top cover of the hood:
- Remove the washer nozzle tubes.
- Remove the hood top seal.
10. Remove retaining clips (A) front fender covers:
- Press the foam baffle to the side to release the front fender cover retaining strap.
- Detach the front fender cover retainers from the A-pillar.
Installation
Installation is made in an order, the return to removal.