Removing
1. Disconnect the negative battery terminal.
2. Remove the engine cover.
3. Remove the intake duct.
4. Remove the air inlet hose.
5. Remove the cooling fan assembly.
6. Remove wire clamp (A).
1. Wiring bracket.
Note. The arrow in the illustration points towards the front of the vehicle.
7. Loosen the bolt (IN) wiring bracket.
8. Loosen the nut (WITH) output "S" and disconnect the wire from the output.
9. Loosen the nut (D) output "IN" and disconnect the wire from the output.
10. Loosen the bolts (E) starter mounts.
11. Remove the starter upward from the vehicle.
Installation
Installation is made in an order, the return to removal.
Attention. Make sure that the output nut "IN" tightened securely.