Attention:
Before proceeding with removal, turn the ignition key to the OFF position, disconnect both cables from the battery, and wait at least 3 minutes.
Carry out work from the side of the airbag module.
When carrying the airbag module, do not grasp the wires.
When installing, do not pinch or damage the wires.
After installation, check if the system is working properly by observing the airbag warning light.
If the airbag warning lamp indicates a malfunction, use the self-diagnosis function or the CONSULT tester to erase the memory.
If the airbag warning light still indicates a malfunction, run system diagnostics. Repair defective components.
When replacing the airbag module after it has been deployed, replace the seatback assembly.