Table of contents: Removal ↓ Installation ↓
The air flow sensor is mounted on the air filter cover.
Before removing it, disconnect the negative battery cable.
Removal
1. Loosen the retaining clamp and disconnect the intake air duct from the air flow sensor.
2. Disconnect the connection connector from the air flow sensor.
3. Unscrew the four bolts (three of them are indicated by arrows) and remove the air flow sensor from the air filter housing.
4. Remove the sealing ring and discard it – a new one must be used during installation.
Installation
5. Installation is carried out in the reverse order of removal. When installing, use a new sealing ring.