Note. New door mirror glass can be purchased individually. To remove the old glass, it must be heated with a hair dryer to melt the adhesive layer. New glue can be purchased from the manufacturer's dealership - try to use only a branded product.
Manual Mirrors
Removing
1. Loosen the screws securing the mirror bracket to the door and carefully remove the mirror along with the trim (see accompanying illustration). Be careful not to drop the mirror mounting plate inside the door. If this does happen, remove the door trim panel and plastic sealing film, making sure that the plate is accessible so that it can be returned to its original position during assembly.
1 - mirror
2 - finishing pad
3 - screws
2. Check all components for cracks or other damage. Replace defective parts.
Installation
Installation is in the reverse order.
Before tightening the mounting screws, make sure that the mirror bracket is correctly positioned.
Power mirrors
Removing
1. Give the screw of fastening of the panel of internal furnish of a mirror to a frame.
2. Disconnect the drive electrical connector.
3. Give fixing screws and remove a mirror to a frame of a door.
4. Check all components for cracks or other damage. Replace defective ones.
Installation
Installation is in the reverse order.
Check the condition of the electrical connector contacts.