Table of contents: Removal ↓ Installation ↓
Removal
1. Remove the interior door handles, trim panel and polymer sealing film.
2. Remove the window glass.
3. On models with power windows, disconnect the electrical connector from the regulator.
4. Loosen the bolts securing the regulator to the inner door panel and the nuts securing the support strip. Remove the regulator assembly through the access hole in the inner door panel.
Installation
Installation is carried out in reverse order.
1. Before installation, lubricate the regulator with multi-purpose grease.
2. Adjust the position of the window glass.
3. Before installing the polymer sealing film and door trim panel, check the proper functioning of the lock and window lift mechanisms.
(The original is posted on the portal nissanbook.ru)