- In case of removal of the steering gear assembly from the vehicle, perform the final tightening of the threaded connections with the unloaded vehicle standing on the ground. Check wheel alignment.
- Before disassembling any assembly, thoroughly clean its outer surface.
- Disassembly should be done in a clean area. It is very important to take the necessary measures to prevent contamination of internal parts, as well as the ingress of foreign substances on them.
- During disassembly, arrange the parts in order. This will make assembly easier and ensure it is correct.
- Use a nylon cloth or paper towels to clean the parts. The use of regular rags may leave fibers on the parts, which may interfere with the normal operation of the assembly.
- Do not reuse disposable parts.
- Before assembly, lubricate all parts of the hydraulic system with the recommended Genuine NISSAN PSF working fluid or equivalent. O-rings and seals can be lubricated with petroleum jelly. Do not use any other lubricants.
- Replace gaskets, seals and o-rings. When installing o-rings, seals and gaskets, be careful not to damage them. Where indicated, perform operation check operations.