Removing
Note. When disconnecting the contact disk, fix its body with adhesive tape to prevent turning. This will eliminate the need to adjust the neutral position during the installation of the contact plate.
1. Set the front wheels of the vehicle to the straight ahead position.
2. Remove the driver's airbag module.
3. Fix the steering wheel and unscrew the lock nut.
4. Remove the steering wheel using a special puller (A) (ST27180001 (J-25726 A)).
Installation
Installation is carried out in the reverse order of removal.
Attention. Do not rotate the contact disk unnecessarily. Do not turn the contact disk more than necessary, as this will break the contact.
Note. The procedure for setting the contact disk to the neutral position is described in chapter «Passive safety».