Attention.
- Any drive belt that has been removed from the engine must be replaced with a new one.
- Each time the drive belt is replaced, the automatic tensioner must be replaced with a new one.
- Do not start the engine without the drive belt, as this may damage the crankshaft pulley.
1. Using an impact wrench, remove the engine sump.
2. Remove the front right wheel.
3. Remove the right fender liner.
4. Turn the auto tensioner adjusting bolt clockwise to loosen the tension and remove the drive belt.
5. If necessary, remove the automatic tensioner.
Information copied from the website nissanbook.ru