Table of contents: Removal ↓ Installation ↓
Removal
Caution: Before carrying out work, disconnect both cables from the battery and wait at least 3 minutes.
1. Disconnect the connectors from the side airbag module, seat belt buckle switch and heated seat (if any).
2. Remove the covers from the front and rear legs.
3. Unscrew the bolts (4) and remove the seat from the vehicle.
4. Remove the headrest.
Caution: To avoid damage to components, cover them with cloths when removing and installing.
Installation
Installation is performed in the reverse order of removal.
Tighten the front seat mounting bolts to the specified torque.
Tightening torque: 46.6 N·m (4.8 kg·m)
Caution: To avoid damage to components, cover them with cloths when removing and installing.
Material borrowed from the website [NISSANBOOK]